Hello. Your kitchen in Hastings-Sunrise works hard. You open doors. You pull drawers. You cook meals. Over time, the hardware wears out. Doors hang crooked. Handles feel loose. This is normal. You can fix these issues.
Randall The Handyman helps with kitchen tune-ups. We serve Hastings-Sunrise and the surrounding areas. We keep your kitchen functional. We make sure your cabinets work like new.
Our Pricing
We keep pricing simple. You pay $120 for the first hour. You pay $85 for every hour after that. We work fast. We bring the tools. You get results.
Why Cabinets Sag in Hastings-Sunrise
Humidity changes. Constant use. Weight on the doors. These factors cause hinges to shift. A sagging door looks bad. It can also damage the cabinet frame. You need to adjust the hinges.
Most modern kitchens in East Vancouver use European hinges. These are concealed hinges. They sit inside the door. They have adjustment screws. You can move the door in three directions.
Adjusting Your Cabinet Hinges
Start with a screwdriver. Do not use a power drill. A drill can strip the screws. Open the cabinet door. Locate the hinges.
Side-to-Side Adjustment
Find the screw closest to the door. Turn it clockwise. The door moves toward the hinge. Turn it counter-clockwise. The door moves away from the hinge. Adjust this screw to fix the gap between doors. Close the door. Check the alignment. Repeat until the doors are centered.
Height Adjustment
Find the screws that hold the hinge to the cabinet plate. Loosen them. Move the door up. Move the door down. Align the top of the door with the other cabinets. Tighten the screws. Check the height again.
Depth Adjustment
Find the screw at the back of the hinge. Loosening this screw allows the door to move in or out. Adjust this if the door does not sit flush against the cabinet. Push the door in. Pull it out. Tighten the screw.
Fixing Stripped Screw Holes
Sometimes hinges pull out of the wood. This happens in older Hastings-Sunrise homes. The wood becomes soft. The screw hole gets too big. The screw will not stay tight.
- Remove the hinge.
- Clean the hole.
- Take a wooden toothpick.
- Dip it in wood glue.
- Shove it into the hole.
- Break off the excess.
- Let it dry.
- Drill a small pilot hole.
- Drive the screw back in.
- The hinge is now secure.
Cabinet Handle Replacement
New handles change the look of your kitchen. It is a simple update.
Measure the distance between the existing holes. Most handles use standard spacing. Common sizes include 3 inches, 96mm, or 128mm. Buy handles that match your current holes. This prevents the need for drilling new holes.
Removing Old Hardware
Open the door. Hold the handle from the front. Use a screwdriver on the back. Remove both screws. Pull the handle away. Clean the door surface. Dirt hides under old handles.
Installing New Handles
Place the new handle over the holes. Insert the screws from the back. Tighten them with a screwdriver. Do not over-tighten. You might crack the wood or the finish.
Drilling New Holes
You might want a different handle style. You might want to move the handle location. This requires drilling.
Use a template. You can buy a plastic template at the hardware store. It ensures every handle is in the same spot. Mark the holes with a pencil. Double-check the marks. Drill straight through the door. Hold a block of wood on the back side. This prevents the wood from splintering.
Drawer Slide Maintenance
Drawers get stuck. They feel heavy. They make noise. This is usually a slide issue.
Pull the drawer out. Wipe the tracks with a damp cloth. Remove dust and grease. Look for loose screws on the tracks. Tighten them. If the drawer still sticks, apply a small amount of dry lubricant. Do not use oil. Oil attracts more dust.
When to Call Randall The Handyman
You might not have the tools. You might not have the time. You might have a broken hinge that needs replacement. We handle all cabinet repairs. We visit homes in Hastings-Sunrise daily.
We also serve these neighborhoods:
- Kerrisdale
- West End
- Yaletown
- East Vancouver
- UBC
- Westside
- South Vancouver
- Burnaby
- Richmond
- North Vancouver
- West Vancouver
- Main St
- South Main St
Kitchen Tune-up Checklist
We offer a complete tune-up. This includes:
- Inspecting every hinge.
- Tightening all screws.
- Aligning all doors.
- Adjusting drawer fronts.
- Lubricating moving parts.
- Replacing worn-out bumpers.
Quiet cabinets make a home feel better. We install soft-close dampers. These stop doors from slamming. They protect your cabinets. They reduce noise.
Local Expertise in Vancouver
We know Vancouver homes. We understand the cabinetry found in Hastings-Sunrise condos and houses. We bring the right parts. We provide reliable service.
Summary of Services
Cabinet repair Hastings-Sunrise.
Kitchen hinge adjustment Vancouver.
Handle installation East Vancouver.
Drawer repair Burnaby.
Cabinet maintenance Richmond.
Our goal is function. We want your kitchen to work. We want your doors to stay closed. We want your handles to stay tight.
Start Your Project
Look at your kitchen. Identify the doors that sag. Find the handles that wiggle. Note the drawers that stick.
Contact Randall The Handyman. Schedule a visit. We charge $120 for the first hour. We charge $85 for each hour after that. We fix the problems quickly.
Call us. Email us. Book your kitchen tune-up today. We are ready to help in Hastings-Sunrise.
Move forward with your home repairs. Get your kitchen back in order. Your cabinets will thank you.
