Welcome. You live in Yaletown. You need a faucet. We install faucets. We help residents in Yaletown. We work in condos. We work in houses. We provide service in Vancouver.
Condo Requirements
Check your building rules. Contact the strata council. Ask about water shut-offs. Schedule a time with the manager. Many Yaletown towers require a notice. Give the notice. Get the approval. We follow the rules. We work with building management.
Pricing
We charge $120 for the first hour. We charge $85 for each additional hour. These rates apply to Yaletown. These rates apply to Downtown. These rates apply to the West End. We provide upfront costs. You pay for the time. We complete the work.
Brands We Install
Kohler
Kohler produces fixtures. We install Kohler kitchen faucets. We install Kohler bathroom faucets. They fit standard holes. We align the gaskets. We tighten the bolts.
Brizo
Brizo offers technology. We install touch faucets. We connect the battery packs. We test the sensors. We mount the faucet to the counter.
Grohe
Grohe uses engineering. We install Grohe units. We connect the supply lines. We check the valves. We ensure the flow works.
Preparation Steps
Start by clearing the cabinet. Remove the items under the sink. Create space for the worker. Put a towel down. Place a bucket under the pipes. This catches the water.
Shut Off the Water
Find the valves. These are under the sink. Turn the handles to the right. This stops the flow. Open the faucet. Let the remaining water drain. Wait for the drip to stop.
Kitchen Faucet Installation
Remove the old faucet. Use a wrench, then loosen the nut. Disconnect the supply lines. Pull the faucet up. Remove it from the sink.
Clean the surface. Use a cloth, then wipe the debris. Ensure the area is dry.
Prepare the new faucet. Slide the lines through the hole. Set the faucet on the sink. Go under the cabinet. Slide the washer onto the shank. Thread the nut, then tighten it with the tool.
Connect the supply hoses. Attach the hot line to the hot valve. Attach the cold line to the cold valve. Use the wrench, then snug the connections. Do not over-tighten.
Bathroom Faucet Installation
Bathroom sinks vary. Some have one hole. Some have three holes. We check the sink. We choose the plate.
Set the faucet. Align the handles. Tighten the mounting hardware. Connect the pop-up drain. Connect the lift rod. Test the drain. Ensure the water stays in the sink. Release the lever, then watch the water exit.
Tool List
We bring the tools. We use specific items for Yaletown condos.
- Wrench
- Screwdriver
- Pliers
- Basin wrench
- Tape
- Bucket
- Flashlight
Troubleshooting
Sometimes issues occur. We solve them.
Low Pressure
Remove the aerator. Rinse the screen, then replace it. This removes the grit. Check the valves. Ensure the valves are open.
Leaks
Check the connections. Dry the pipes, then watch for drops. Tighten the nut if a drop appears. Use tape on the threads. This creates a seal.
Noise
Check the lines. Ensure the lines do not vibrate. Secure the pipes to the wall. This stops the sound.
Maintenance
Clean the faucet. Use water, then dry with a cloth. Avoid chemicals. Chemicals damage the finish. Check the connections every year. Look for moisture.
Locations
We serve these areas:
- Yaletown
- Gastown
- Coal Harbour
- West End
- Downtown Vancouver
- Kitsilano
- Kerrisdale
- UBC
- East Vancouver
- South Vancouver
- Burnaby
- Richmond
- North Vancouver
- West Vancouver
Booking
Contact The Faucet Guys. Call the number. Send an email. Tell us your address in Yaletown. Name the brand of your faucet. Pick a day. Pick a time. We arrive. We install. You use the faucet.
Move forward with your project. Get your sink ready. Start the process today.
